S355J0 1.0553 - EN 10025-2-2004

Grade	S355J0
European Standard Steel Grade	1.0553
Corresponding Standard	EN 10025-2-2004 Hot rolled products of structural steels - Part 2:Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel

S355J0 Chemical Element Composition Content (%)

	Component	C ^①	Si	Mn	P ^④	S ^④⑤	Cu ^⑥	N ^⑦	More
厚度t≤16	Minimum Value	-	-	-	-	-	-	-	⑧
厚度t≤16	Maximum Value	0.2	0.55	1.6	0.03	0.03	0.55	0.012	⑧

	Component	C ^②	Si	Mn	P ^④	S ^④⑤	Cu ^⑥	N ^⑦	More
厚度16<t≤40	Minimum Value	-	-	-	-	-	-	-	⑧
厚度16<t≤40	Maximum Value	0.2	0.55	1.6	0.03	0.03	0.55	0.012	⑧

	Component	C ^③	Si	Mn	P ^④	S ^④⑤	Cu ^⑥	N ^⑦	More
厚度t>40	Minimum Value	-	-	-	-	-	-	-	⑧
厚度t>40	Maximum Value	0.22	0.55	1.6	0.03	0.03	0.55	0.012	⑧

S355J0 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t＜3	510~680	≥355	See Remarks
3≤t≤16	470~630	≥355	≥22
16＜t≤40	470~630	≥345	≥22
40＜t≤63	470~630	≥335	≥21
63＜t≤80	470~630	≥325	≥20
80＜t≤100	470~630	≥315	≥20
100＜t≤150	450~600	≥295	≥18
150＜t≤200	450~600	≥285	≥17
200＜t≤250	450~600	≥275	≥17

Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	SS	BS EN/BS
16Mn	SS490B	A441 A633	E355C Fe510C	St52-3U	E36-3	S355J0 Fe510C①	1.0553	2132-01 2134-01	50C

S355J0 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!