Grade C1220
Other Names
Corresponding Standard JIS H 3100-2018
Copper and copper alloy sheets, plates and strips
Classification Copper and Copper Alloys
C1220 Chemical Element Composition Content (%)
Component P Cu
Minimum Value 0.015 99.9
Maximum Value 0.04 -
C1220 Mechanical Properties
condition Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Plates (P, PS), strips (R, RS); 0.1≤t<0.15 C1220 P-O,C1220 PS-O,C1220 R-O,C1220 RS-O Annealing (O) ≥195 ≥20 -
Plates (P, PS), strips (R, RS); 0.15 ≤ t < 0.3 Annealing (O) ≥195 ≥30 -
Plates (P, PS); 0.3≤t≤30 C1220 P-O,C1220 PS-O Annealing (O) ≥195 ≥35 -
Strip (R, RS); 0.3≤t≤3 C1220 R-O,C1220 RS-O Annealing (O) ≥195 ≥35 -
Plates (P, PS), strips (R, RS); 0.1≤t<0.15 C1220 P-1/4H,C1220 PS-1/4H,C1220 R-1/4H,C1220 RS-1/4H 1/4 Hard (1/4H) 215~285 ≥15 -
Plates (P, PS), strips (R, RS); 0.15 ≤ t < 0.3 1/4 Hard (1/4H) 215~285 ≥20 -
Plates (P, PS); 0.3≤t≤30 C1220 P-1/4H,C1220 PS-1/4H 1/4 Hard (1/4H) 215~275 ≥25 HV
55~100
Strip (R, RS); 0.3≤t≤3 C1220 R-1/4H,C1220 RS-1/4H 1/4 Hard (1/4H) 215~275 ≥25 55~100
Plates (P, PS), strips (R, RS); 0.1≤t<0.15 C1220 P-1/2H,C1220 PS-1/2H,C1220 R-1/2H,C1220 RS-1/2H 1/2 Hard (1/2H) 235~315 - -
Plates (P, PS), strips (R, RS); 0.15 ≤ t < 0.3 1/2 Hard (1/2H) 235~315 ≥10 *
75~120
Plate material (P, PS); 0.3≤t≤20 C1220 P-1/2H,C1220 PS-1/2H 1/2 Hard (1/2H) 245~315 ≥15 75~120
Strip (R, RS); 0.3≤t≤3 C1220 R-1/2H,C1220 RS-1/2H 1/2 Hard (1/2H) 245~315 ≥15 75~120
Plates (P, PS); 0.1 ≤ t ≤ 10 C1220 P-H,C1220 PS-H Hard (H) ≥275 - ≥80
Strip (R, RS); 0.1≤t≤3 C1220 R-H,C1220 RS-H Hard (H) ≥275 - ≥80
Approximate Comparison Table Processing pure copper, silver copper
China Japan United States International Organization for Standardization Germany France European Standard Russia
GB JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST
TP2 C1220
C12200
99.85Cu C12200 Cu-DHP C12200 Cu-DHP
(SF-Cu)
CW024A
(2.0090)
Cu-DH
C12200
Cu-DHP CW024A М1Ф
C1220 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!