C6161 C6161 P - JIS H 3100-2018

Grade	C6161
Other Names
Corresponding Standard	JIS H 3100-2018 Copper and copper alloy sheets, plates and strips
Classification	Copper and Copper Alloys
Properties	Corrosion Resistance

C6161 Chemical Element Composition Content (%)

Component	Fe	Mn	Ni	Cu	Pb	Al	More
Minimum Value	2	0.5	0.5	83	-	7	Cu+Fe+Al+Mn+Ni≥99.5
Maximum Value	4	2	2	90	0.02	10	Cu+Fe+Al+Mn+Ni≥99.5

C6161 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Hardness HBW
Sheet (P); 0.8≤t≤50	C6161 P-F	Hot Working Condition (F)	≥490	≥30	-
Plate stock (P); 50 < t ≤ 125		Hot Working Condition (F)	≥450	≥35	-
Sheet (P); 0.8≤t≤50	C6161 P-O	Annealing (O)	≥490	≥35	-
Plate stock (P); 50 < t ≤ 125		Annealing (O)	≥450	≥35	-
Sheet (P); 0.8≤t≤50	C6161 P-1/2H	1/2 Hard (1/2H)	≥635	≥25	-
Plate stock (P); 50 < t ≤ 125		1/2 Hard (1/2H)	≥590	≥20	-
Sheet (P); 0.8≤t≤50	C6161 P-H	Hard (H)	≥685	≥10	-

Approximate Comparison Table Bronze

China		Japan	United States		International Organization for Standardization		Germany		European Standard		Russia
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	Numerical Grade	GOST
QAl10-3-1.5	T61760	C6161 C61600	85Cu-10Al-3Fe-2Mn	C61600	CuAl10Fe3Mn2	C61600	CuAl10Fe3Mn2	2.0936 C61600	CuAl10Fe3Mn2	CW306G	БрАЖМц10-3-1.5

C6161 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!