中文版
Home Material NF EN 10025-2-2005
简体 | 繁體
Grade S235J0
1.0114
Old Grade
Corresponding Standard NF EN 10025-2-2005
Hot Rolled Products of Structural Steels - Part 2: Technical Delivery Conditions for Non-Alloy Structural Steels
Classification Carbon Steel
S235J0 Chemical Element Composition Content (%)
  Component C Mn P ① S ① ② Cu ③ N ④
≤ 16 Minimum Value - - - - - -
Maximum Value 0.17 1.4 0.03 0.03 0.55 0.012
  Component C Mn P ① S ① ② Cu ③ N ④
>16≤40 Minimum Value - - - - - -
Maximum Value 0.17 1.4 0.03 0.03 0.55 0.012
  Component C ※ Mn P ① S ① ② Cu ③ N ④
>40 Minimum Value - - - - - -
Maximum Value 0.17 1.4 0.03 0.03 0.55 0.012
◎ The carbon steel series of the French NF EN standard is equivalent to the engineering non-alloy steel of the European standard (EN), and its mechanical properties are the same as the similar non-alloy steel in Germany.
◎ NF old steel number from [NF A35-501 (1983)].
◎ If additional elements are added, they should be mentioned in the inspection report.
S235J0 Mechanical Properties
thickness
t
mm		 Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Impact Energy Absorption
KV2
J
Long products and flat products; t≤1 360~510 ≥235 ≥17(l) ≥27
Long and flat products; 1<t≤1.5 360~510 ≥235 ≥18(l) ≥27
Long and flat products; 1.5<t≤2 360~510 ≥235 ≥19(l) ≥27
Long and flat products; 2<t≤2.5 360~510 ≥235 ≥20(l) ≥27
Long and flat products; 2.5<t<3 360~510 ≥235 ≥21(l) ≥27
Long and flat products; 3≤t≤16 360~510 ≥235 ≥26(l) ≥27
Long and flat products; 16<t≤40 360~510 ≥225 ≥26(l) ≥27
Long and flat products; 40<t≤63 360~510 ≥215 ≥25(l) ≥27
Long and flat products; 63<t≤80 360~510 ≥215 ≥24(l) ≥27
Long and flat products; 80<t≤100 360~510 ≥215 ≥24(l) ≥27
Long and flat products; 100<t≤150 350~500 ≥195 ≥22(l) ≥27
Long and flat products; 150<t≤200 340~490 ≥185 ≥21(l) ≥27
Long and flat products; 200<t≤250 340~490 ≥175 ≥21(l) ≥27
◎ l-longitudinal；t-transverse
S235J0 Corresponding Standards(Same grade name, different standards)
1 EN 10025-2-2004
S235J0 1.0114
2 EN 10025-2-2019
S235J0 1.0114
3 DIN EN 10025-2-2019
S235J0 1.0114
4 Q/BQB 303-2018
S235J0
5 NF EN 10025-2-2005
S235J0 1.0114 (E24-3)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!