S185 1.0035 - NF EN 10025-2-2005

Grade	S185
	1.0035
Corresponding Standard	NF EN 10025-2-2005 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel

S185 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Long products and flat products; t≤1	310~540	≥185	≥10(l)
Long and flat products; 1<t≤1.5	310~540	≥185	≥11(l)
Long and flat products; 1.5<t≤2	310~540	≥185	≥12(l)
Long and flat products; 2<t≤2.5	310~540	≥185	≥13(l)
Long and flat products; 2.5<t<3	310~540	≥185	≥14(l)
Long and flat products; 3≤t≤16	290~510	≥185	≥18(l)
Long and flat products; 16<t≤40	290~510	≥175	≥18(l)
Long and flat products; 40<t≤63	290~510	≥175	≥17(l)
Long and flat products; 63<t≤80	290~510	≥175	≥16(l)
Long and flat products; 80<t≤100	290~510	≥175	≥16(l)
Long and flat products; 100<t≤150	280~500	≥165	≥15(l)
Long and flat products; 150<t≤200	270~490	≥155	≥15(l)
Long and flat products; 200<t≤250	270~490	≥145	≥15(l)

◎ l-longitudinal；t-transverse

1 Approximate Comparison Table

China		United States	International Organization for Standardization	Germany		France	Russia	United Kingdom
GB	ISC	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
Q195 (A1) (B1)	U11952	A285M Gr.B	HR2	S185 (St33)	1.0035	S185 (A33)	Ст1кп Ст1сп Ст1пс	S185 (040A10)

2 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany		France	Russia	United Kingdom
GB	JIS	ASTM/AISI	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
Q195	SS 330 SPHC	Gr.B	E185 (Fe310)	S185	1.0035	S185	Ст1кп Ст1сп Ст1пс	S185

S185 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!