S275J0 1.0143 E28-3 - NF EN 10025-2-2005

Grade	S275J0
	1.0143
Old Grade
Corresponding Standard	NF EN 10025-2-2005 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel

S275J0 Chemical Element Composition Content (%)

	Component	C	Mn	P ^①	S ^{① ②}	Cu ^③	N ^④
≤ 16	Minimum Value	-	-	-	-	-	-
≤ 16	Maximum Value	0.18	1.5	0.03	0.03	0.55	0.012

	Component	C	Mn	P ^①	S ^{① ②}	Cu ^③	N ^④
>16≤40	Minimum Value	-	-	-	-	-	-
>16≤40	Maximum Value	0.18	1.5	0.03	0.03	0.55	0.012

	Component	C ^※	Mn	P ^①	S ^{① ②}	Cu ^③	N ^④
>40	Minimum Value	-	-	-	-	-	-
>40	Maximum Value	0.18	1.5	0.03	0.03	0.55	0.012

◎ The carbon steel series of the French NF EN standard is equivalent to the engineering non-alloy steel of the European standard (EN), and its mechanical properties are the same as the similar non-alloy steel in Germany.
◎ NF old steel number from [NF A35-501 (1983)].
◎ If additional elements are added, they should be mentioned in the inspection report.

S275J0 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Long products and flat products; t≤1	430~580	≥275	≥15	≥27
Long and flat products; 1<t≤1.5	430~580	≥275	≥16	≥27
Long and flat products; 1.5<t≤2	430~580	≥275	≥17	≥27
Long and flat products; 2<t≤2.5	430~580	≥275	≥18	≥27
Long and flat products; 2.5<t<3	430~580	≥275	≥19	≥27
Long and flat products; 3≤t≤16	410~560	≥275	≥23	≥27
Long and flat products; 16<t≤40	410~560	≥265	≥23	≥27
Long and flat products; 40<t≤63	410~560	≥255	≥22	≥27
Long and flat products; 63<t≤80	410~560	≥245	≥21	≥27
Long and flat products; 80<t≤100	410~560	≥235	≥21	≥27
Long and flat products; 100<t≤150	400~540	≥225	≥19	≥27
Long and flat products; 150<t≤200	380~540	≥215	≥18	≥27
Long and flat products; 200<t≤250	380~540	≥205	≥18	≥27

◎ l-longitudinal；t-transverse

S275J0 Corresponding Standards(Same grade name, different standards)

1	EN 10025-2-2004
	S275J0 1.0143
2	EN 10025-2-2019
	S275J0 1.0143
3	DIN EN 10025-2-2019
	S275J0 1.0143
4	Q/BQB 303-2018
	S275J0
5	NF EN 10025-2-2005
	S275J0 1.0143 (E28-3)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!