SA182 Grade F10 S33100 - ASME SA-182/SA-182M-2019

Grade	SA182 Grade F10
	S33100
Corresponding Standard	ASME SA-182/SA-182M-2019 Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
Classification	Alloy Steel
Properties	Corrosion Resistance

SA182 Grade F10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni
Minimum Value	0.1	1	0.5	-	-	7	19
Maximum Value	0.2	1.4	0.8	0.04	0.03	9	22

SA182 Grade F10 Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
≥550	≥205	≥30	≥50

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!