1.0038 S235JRG2 - EN 10250-2-2000

Grade	1.0038
European Standard Steel Grade	S235JRG2
Corresponding Standard	EN 10250-2-2000 Open Die Steel Forgings for General Engineering Purposes - Part 2: Non-Alloy Quality and Special Steels
Classification	Carbon Steel

1.0038 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo
Minimum Value	-	-	-	-	-	-	-	-
Maximum Value	0.2	0.55	1.4	0.045	0.045	0.3	0.3	0.08

1 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
Q235C	SS330	Gr.36	Fe360B	RSt37-2 S235JRG2	E24-2NE	S235JRG2 Fe360BFN①	1.0038	St3ps St3sp	1312-00	40B

2 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China		Japan	United States	International Organization for Standardization	European Standard
GB	ISC	JIS	ASTM/AISI	ISO	EN	Numerical Grade
Q235A (GB/T 700-2006)	U12352	SS400 (JIS G3101:2004) (JIS G3106:2004)	Gr.65[240] (ASTM A573/A573M:2000)	E235A (ISO 630:1995)	S235JR (EN 10025-2:2004)	1.0038

3 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China		Japan	United States	International Organization for Standardization	European Standard
GB	ISC	JIS	ASTM/AISI	ISO	EN	Numerical Grade
Q235B (GB/T 700-2006)	U12355	SS400 (JIS G3101:2004) (JIS G3106:2004)	Gr.65[240] (ASTM A573/A573M:2000)	E235B (ISO 630:1995)	S235JR (EN 10025-2:2004)	1.0038

1.0038 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!