Ni99.2 2.4066 - DIN 17752-2002

Grade	Ni99.2
Germany W-Nr.	2.4066
Corresponding Standard	DIN 17752-2002 Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.9 g/cm³

Ni99.2 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cu	Ti	Co	Mg	More
Minimum Value	-	-	-	-	-	-	-	-	-	Ni+Co≥99.2
Maximum Value	0.4	0.1	0.25	0.35	0.005	0.25	0.1	1	0.15	Ni+Co≥99.2

Ni99.2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Rods; 2≤d≤55	Soft annealing (F37)	≥370	≥100	≥40	≤130 HBW2.5/62.5
Bar stock; 2≤d≤50	1/2-Hard (F49)	≥490	≥340	≥15	≈150 HBW2.5/62.5
Bars; 2 ≤ d ≤ 35	Hard (F59)	≥590	≥540	≥5	≈200 HBW2.5/62.5

Ni99.2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!