X1CrNiMoCuN24-22-8 1.4652 - NF EN 10088-1-2005

Grade	X1CrNiMoCuN24-22-8
	1.4652
Corresponding Standard	NF EN 10088-1-2005 Stainless Steels — Part 1: List of Stainless Steels
Classification	Austenitic Stainless Steel
Density	8 g/cm³

X1CrNiMoCuN24-22-8 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	2	-	-	23	21	0.3	7	0.45
Maximum Value	0.02	0.5	4	0.03	0.005	25	23	0.6	8	0.55

◎ Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

X1CrNiMoCuN24-22-8 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X1CrNiMoCuN 24-22-8 1.4652
2	ISO TS 15510-2003
	X1CrNiMoCuN24-22-8
3	EN 10088-3-2014
	X1CrNiMoCuN 24-22-8 1.4652
4	ISO 15510-2014
	X1CrNiMoCuN24-22-8 4652-326-54-I
5	DIN EN 10088-3-2014
	X1CrNiMoCuN 24-22-8 1.4652
6	NF EN 10088-2-2005
	X1CrNiMoCuN24-22-8 1.4652
7	NF EN 10088-1-2005
	X1CrNiMoCuN24-22-8 1.4652

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!