Grade CuNi2Si
European Standard Steel Grade CW111C
Corresponding Standard EN 1654-1998
Copper and copper alloys - Strip for springs and connectors
Classification Copper and Copper Alloys
Density 8.8 g/cm3
CuNi2Si Chemical Element Composition Content (%)
Component Fe Si Mn Ni Pb Other Total More
Minimum Value - 0.4 - 1.6 - - Cu: 余量
Maximum Value 0.2 0.8 0.1 2.5 0.02 0.3
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuNi2Si Mechanical Properties
condition Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Strip CuNi2Si-R430 R430⑤ 430~520 ≥(330) ≥10ⓐ ;≥13ⓑ
Strip CuNi2Si-H125 H125⑤ HV: 125~155
Strip CuNi2Si-R450 Solution treatment + cold rolling R450 450~600 ≥(360) ≥3ⓐ ;≥5ⓑ
Strip CuNi2Si-H130 Solution treatment + cold rolling H130 HV: 130~180
Strip CuNi2Si-R510 R510⑤ 510~600 ≥(450) ≥7ⓐ ;≥10ⓑ
Strip CuNi2Si-H150 H150⑤ HV: 150~180
Strip CuNi2Si-R600 R600④ ≥600 ≥(550) ≥5ⓐ ;≥8ⓑ
Strip CuNi2Si-H180 H180④ HV: ≥180
1 Approximate Comparison Table bronze
China Japan United States International Organization for Standardization European Standard Russia
GB JIS ASTM UNS ISO Numerical Grade EN Numerical Grade GOST
QSi0.6-2 C6470
C64700
97.5Cu-2Ni-.5Si C64700 CuNi2Si C64700 CuNi2Si CW111C БрКН0.6-2
2 Approximate Comparison Table Cupper and cupper alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuNi2Si 2.0855 CuNi2Si CW111C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!