中文版
Home Material DIN EN ISO 7153-1-2016
简体 | 繁體
Grade X12Cr 13
Germany W-Nr. 1.4006
Corresponding Standard DIN EN ISO 7153-1-2016
Surgicalinstruments-Materials-Part1:Metals（ISO 7153-1-2016）
Classification Martensitic Stainless Steel
Properties Corrosion Resistance
Density 7.7 g/cm3
X12Cr 13 Chemical Element Composition Content (%)
Component C ⓒ Si Mn P S ⓑ Cr Ni
Minimum Value 0.08 - - - - 11.5 -
Maximum Value 0.15 1 1.5 0.04 0.03 13.5 0.75
X12Cr 13 Mechanical Properties
product Hardness
HBW
Steel HRC①: 35
HV5/HV10②: 360
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
12Cr13
(1Cr13) 		S41010 410 SUS 410 STS 410 410 S41000 X12Cr 13 4006-410-00-I X10Cr 13
X12Cr 13 		1.4006
1.4006 		Z12C 13
Z10C13 		X12Cr 13 1.4006 12Х13
12KH13
15KH13L 		2302 410S21
2 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
12Cr13
(1Cr13) 		S41010 410 SUS 410 STS 410 410 S41000 X12Cr 13
3
(ISO 683-13-1986) 		X10Cr 13 1.4006 Z12C 13 X12Cr 13 1.4006 12Х13 2302 410S21
3 Approximate Comparison Table Heat-resistant cast steels and alloys
China Japan United States Germany France Russia United Kingdom
GB JIS ASTM UNS DIN EN/DIN W-Nr. NF EN/NF GOST BS EN/BS
ZG1Cr13 SCS1 CA15 J91150 G-X7Cr13
G-X10Cr13 		1.4001
1.4006 		Z12C13M 15Х13Л 410C21
X12Cr13 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X12Cr 13 1.4006
2 EN 10263-5-2001
X12Cr13 1.4006
3 EN 10250-4-1999
X12Cr 13 1.4006
4 ISO TS 15510-2003
X12Cr13
5 EN 10088-3-2005
X12Cr 13 1.4006
6 EN 10088-3-2014
X12Cr 13 1.4006
7 ISO 15510-2014
X12Cr13 4006-410-00-I
8 DIN EN 10263-5-2018
X12Cr13 1.4006
9 DIN EN 10088-3-2014
X12Cr 13 1.4006
10 ISO 683-18-2014
X12Cr13 4006-410-00-I
11 ISO 4954-2018
X12Cr13 4006-410-00-I
12 NF EN 10088-2-2005
X12Cr13 1.4006
13 NF EN 10088-1-2005
X12Cr13 1.4006
14 DIN EN ISO 7153-1-2016
X12Cr 13 1.4006
15 EN 10263-5-2017
X12Cr13 1.4006
16 ISO 4954-2-2024
X12Cr13 4006-410-00-I

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!