Inconel 601 - H2ABC

Inconel 601 Chemical Element Composition Content (%)

Component	C	Si	Mn	S	Cr	Ni	Cu	Al	More
Minimum Value	-	-	-	-	21	58	-	1	Fe:Remainder
Maximum Value	0.1	0.5	1	0.015	25	63	1	1.7	Fe:Remainder

Corresponding grade: N06601/ASTM UNS; W.n.r.2.4851 /DIN

Inconel 601 Mechanical Properties

Form	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Hardness HBW
bar and rod	Hot-Finished	585~825	240~690	60~15	HRB: 65~95
bar and rod	Annealed	550~790	205~415	70~40	HRB: 60~80
Plate	Annealed	550~690	205~310	65~45	HRB: 60~75
Sheet	Cold-drawn	790~1310	690~1205	20~2	-
Sheet	Annealed	585~690	205~345	55~35	HRB: 65~80
Strip	Cold-drawn	790~1310	690~1205	20~2	-
Strip	Annealed	585~690	205~345	55~35	HRB: 65~80
Tube and pipe	Annealed	550~760	205~415	65~35	HRB: 70~95
Wire	Cold-drawn	825~1415	690~1345	20~3	-
Wire	Annealed	620~790	240~480	45~35	-
All Form	Solution-Treated	515~760	160~380	75~40	HRB: 55~95

Inconel601 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!