07Cr19Ni10 S30409 - GB /T 24511-2017

Grade	07Cr19Ni10
China ISC	S30409
Corresponding Standard	GB /T 24511-2017 Stainless Steel and Heat Resisting Steel Plate, Sheet and Strip for Pressure Equipments
Classification	Austenitic Stainless Steel
Density	7.9 g/cm³

07Cr19Ni10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	0.04	-	-	-	-	18	8	-
Maximum Value	0.1	0.75	2	0.035	0.015	20	10.5	0.1

07Cr19Ni10 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Steel:	Solid Solution Treatment	≥520	Rp0.2：≥220 Rp1.0：≥250 ①	≥40 ②	HBW：≤201 HRB：≤92 HV：≤210

1 Approximate Comparison Table Austenitic Stainless Steel

China		Japan	United States		International Organization for Standardization	Germany		European Standard
GB	ISC	JIS	AISI	UNS	ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
07Cr19Ni10	S30409	SUS 304H	304H	S30409	X6CrNi 18-10 X7CrNi 18-9	X6CrNi18-10	1.4948	X6CrNi18-10	1.4948

2 Approximate Comparison Table Seamless Steel Tubes and Pipes for High Pressure Boiler

07Cr19Ni10 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!