ML35Cr A20354 ML37Cr - GB /T 6478-2015

Grade	ML35Cr
China ISC	A20354
Old Grade
Corresponding Standard	GB /T 6478-2015 Steels For Cold Heading And Cold Extruding
Classification	Alloy Steel
Properties	Forgability

ML35Cr Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr
Minimum Value	0.33	0.1	0.6	-	-	0.9
Maximum Value	0.38	0.3	0.9	0.025	0.025	1.2

ML35Cr Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
5(12)≤d≤60(100）	Annealing	≤600			≥60
d=25 (sample diameter)	Quenching temperature 830~870°C water or oil quenching, tempering temperature 540~680°C	≥850	≥630	≥14

New and Old Grade Replacement List

Approximate Comparison Table Steel for Cold Heading and Cold Extrusion

China	Japan	United States	International Organization for Standardization	European Standard
GB	JIS	ASTM/AISI	ISO	EN
ML35Cr	SCr435	5135	34Cr4	34Cr4

ML35Cr Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!