019Cr19Mo2NbTi S11972 - GB /T 24511-2017

Grade	019Cr19Mo2NbTi
China ISC	S11972
Corresponding Standard	GB /T 24511-2017 Stainless steel and heat resisting steel plate, sheet and strip for pressure equipments
Classification	Duplex Stainless Steel
Density	7.75 g/cm³

019Cr19Mo2NbTi Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N	More
Minimum Value	-	-	-	-	-	17.5	-	1.75	-	Ti+Nb: [0.2+4(C+N)]~0.8
Maximum Value	0.025	1	1	0.035	0.02	19.5	1	2.5	0.035	Ti+Nb: [0.2+4(C+N)]~0.8

019Cr19Mo2NbTi Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Steel:	Annealing Treatment	≥415	≥275	≥20 ①	HBW：≤217 HRB：≤96 HV：≤230

Approximate Comparison Table

China	Japan	United States		International Organization for Standardization		France	European Standard		Sweden
ISC	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	EN	Numerical Grade	SS
S11972	SUS 444	444	S44400	X2CrMoTi18-2	4521-444-00-I	Z3CDT18-02	X2CrMoTi18-2	1.4521	2326

019Cr19Mo2NbTi Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!