S185 1.0035 - EN 10025-2-2004

Grade	S185
European Standard Steel Grade	1.0035
Corresponding Standard	EN 10025-2-2004 Hot rolled products of structural steels - Part 2:Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel
Properties	Weldability

S185 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t＜3	310~540	≥185	8~14
3≤t＜100	290~510	≥175	14~18
100≤t＜150	280~500	≥165	13~15
150≤t＜200	270~490	≥155	13~15
200≤t＜250	270~490	≥145	13~15

1 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China		United States	International Organization for Standardization	Germany		France	Russia	United Kingdom
GB	ISC	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
Q195 (A1) (B1)	U11952	A285M Gr.B	HR2	S185 (St33)	1.0035	S185 (A33)	Ст1кп Ст1сп Ст1пс	S185 (040A10)

2 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
Q195	SS330	A283A A283B Gr.A	Fe310	S185 St33	A33	S185 Fe310-0①	1.0035	St0 St1ps St1sp	1300-00	15HR 5HS S185

3 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China		United States	International Organization for Standardization	European Standard
GB	ISC	ASTM/AISI	ISO	EN	Numerical Grade
Q195 (GB/T 700-2006)	U11952	Gr.C [205] (ASTM A573/A573M:2000)	E185 (ISO 630:1995)	S185 (EN 10025-2:2004)	1.0035

4 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	Japan	United States	International Organization for Standardization	Germany		France	Russia	United Kingdom
GB	JIS	ASTM/AISI	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
Q195	SS 330 SPHC	Gr.B	E185 (Fe310)	S185	1.0035	S185	Ст1кп Ст1сп Ст1пс	S185

S185 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!