Grade 60
Corresponding Standard GOST 1050-1988
Sized Bars Made Of High-Quality Structural Carbon Steel with A Special Surface Finish
Classification Carbon Steel
Properties Weldability Carburizing Ability
60 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Cu As
Minimum Value 0.57 0.17 0.5 - - - - - -
Maximum Value 0.65 0.37 0.8 0.035 0.04 0.25 0.3 0.3 0.08
① Identification numbers for steels (depending on degree of deoxidation) shall be used: kn is for rimmed steel; nc is for semi-killed steel; and identification numbers without letters are for killed steels.
②The nitrogen fraction of total mass in basic oxygen steel shall not exceed 0.006 % for light-gage rolled products and strips and 0.008 % for other types of rolled products.
60 Mechanical Properties
product Tensile Strength
σb
Mpa
Specified Plastic Yield Strength
Rp0.2
Mpa
Elongation or Extension Rate
δ
%
Reduction of Area
ψ
%
Rolled product ≥680 ≥400 ≥12 ≥35
1 Approximate Comparison Table High-Quality Carbon Structural Steel
China United States International Organization for Standardization Germany France Russia Sweden United Kingdom
GB ISC ASTM/AISI UNS ISO DIN EN/DIN W-Nr. NF EN/NF GOST SS BS EN/BS
60 U20602 1060 G10600 C60E4 C60E
Ck60
1.1221 C60E
XC60
60 1678 C60E
070M60
2 Approximate Comparison Table High-Quality Carbon Structural Steel
China Japan United States International Organization for Standardization Germany European Standard Russia United Kingdom
GB JIS ASTM ISO DIN EN/DIN EN Numerical Grade GOST BS EN/BS
60 S58C 1060 C60 C60 C60 1.0601 60
60G
070M60
3 Approximate Comparison Table High-Quality Carbon Structural Steel
China Japan International Organization for Standardization Germany France European Standard Russia United Kingdom
GB JIS ISO DIN EN/DIN NF EN/NF EN Numerical Grade GOST BS EN/BS
60 S58C C60E4 Ck60 XC60 C60E 1.1221 60
60G
070M60
CS60
4 Approximate Comparison Table High-Quality Carbon Structural Steel
China Japan United States International Organization for Standardization France Russia United Kingdom
GB ISC JIS ASTM/AISI ISO NF EN/NF GOST BS EN/BS
60
(GB/T 699-1999)
U20602 S58C 1060 C60
C60E4
C60M2
(ISO 630-1:1987)
C60
XC60
60 060A62
60 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!