17CrS3 - ISO 4954-1-2024

Grade	17CrS3
Corresponding Standard	ISO 4954-1-2024 Steels for cold heading and cold extruding - Technical delivery conditions - Part1: Non-alloy and alloy steels
Classification	Alloy Steel

17CrS3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Cu
Minimum Value	0.12	-	0.6	-	0.02	0.7	-
Maximum Value	0.2	0.3	0.9	0.025	0.04	1.25	0.25

17CrS3 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Reduction of Area ψ %	Hardness HBW
5＜d≤40	+AC	≤520	≥60
5＜d≤40	+FP			140~187
2≤d≤5	+AR+C+AC	≤520	≥62
5＜d≤40		≤500	≥62
2≤d≤5	+AR+C+AC+LC	≤560	≥60
5＜d≤40		≤540	≥60
5＜d≤10	+AC+C	≤630	≥57
10＜d≤40		≤620	≥57

①+AR=as hot-rolled；+AR or +PE=as hot-rolled or peeled；+AR+C=as hot-rolled+cold drawn；+AR+C+AC=as hot-rolled+cold drawn+spheroidized；+AR+C+AC+LC=as hot-rolled+cold drawn+spheroidized+skin passed；+AC= spheroidized ；+AC or +AC+PE=spheroidized or spheroidized+peeled；+AC+C=spheroidized +cold drawn；+FP=treated to ferrite-pearlite structure and hardness range；+AC+C+AC=spheroidized +cold drawn + spheroidized；+AC+C+AC+LC=spheroidized +cold drawn + spheroidized + skin passed

1 Approximate Comparison Table structural alloy steel

Japan	International Organization for Standardization	European Standard
JIS	ISO	EN	Numerical Grade
SCR415HRCH	17CrS3	17CrS3	1.7014

2 Approximate Comparison Table

Japan	International Organization for Standardization	European Standard
JIS	ISO	EN	Numerical Grade
SCR415HRCH	17CrS3	17CrS3	1.7014

17CrS3 Corresponding Standards(Same grade name, different standards)

1	EN 10084-1998
	17CrS3 1.7014
2	EN 10263-3-2001
	17CrS3 1.7014
3	DIN EN 10263-3-2018
	17CrS3 1.7014
4	EN 10263-3-2017
	17CrS3 1.7014
5	DIN EN ISO 683-3-2019
	17CrS3
6	ISO 683-3-2019
	17CrS3
7	DIN EN 10084-2008
	17CrS3 1.7014
8	ISO 4954-2018
	17CrS3
9	NF EN 10084-2008
	17CrS3 1.7014
10	ISO 4954-1-2024
	17CrS3

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!