Grade 20NiCrMoS2-2
Corresponding Standard ISO 4954-1-2024
Steels for cold heading and cold extruding - Technical delivery conditions - Part1: Non-alloy and alloy steels
Classification Alloy Steel
20NiCrMoS2-2 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Cu Mo
Minimum Value 0.17 - 0.65 - 0.02 0.35 0.4 - 0.15
Maximum Value 0.23 0.3 0.95 0.025 0.04 0.7 0.7 0.25 0.25
20NiCrMoS2-2 Mechanical Properties
diameter
d
mm
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Reduction of Area
ψ
%
Hardness
HBW
5<d≤40 +AC ≤590 ≥60
5<d≤40 +FP 149~194
2≤d≤5 +AR+C+AC ≤590 ≥62
5<d≤40 ≤570 ≥62
2≤d≤5 +AR+C+AC+LC ≤630 ≥60
5<d≤40 ≤610 ≥60
5<d≤10 +AC+C ≤720 ≥57
10<d≤40 ≤710 ≥57
①+AR=as hot-rolled;+AR or +PE=as hot-rolled or peeled;+AR+C=as hot-rolled+cold drawn;+AR+C+AC=as hot-rolled+cold drawn+spheroidized;+AR+C+AC+LC=as hot-rolled+cold drawn+spheroidized+skin passed;+AC= spheroidized ;+AC or +AC+PE=spheroidized or spheroidized+peeled;+AC+C=spheroidized +cold drawn;+FP=treated to ferrite-pearlite structure and hardness range;+AC+C+AC=spheroidized +cold drawn + spheroidized;+AC+C+AC+LC=spheroidized +cold drawn + spheroidized + skin passed
1 Approximate Comparison Table Structural Alloy Steel
International Organization for Standardization Germany European Standard Sweden
ISO DIN EN/DIN EN Numerical Grade SS
20NiCrMoS2-2 20NiCrMoS2 20NiCrMoS2-2 1.6526 2506
2 Approximate Comparison Table Steel for Cold Heading and Cold Extrusion
International Organization for Standardization European Standard
ISO EN Numerical Grade
20NiCrMoS2-2 20NiCrMoS2-2 1.6526

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!