X6CrNiSiNCe19-10 1.4818 - DIN EN 10296-2-2006

Grade	X6CrNiSiNCe19-10
Germany W-Nr.	1.4818
Corresponding Standard	DIN EN 10296-2-2006 Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Classification	Austenitic Stainless Steel

X6CrNiSiNCe19-10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N	Ce
Minimum Value	0.04	1	-	-	-	18	9	0.12	0.03
Maximum Value	0.08	2	1	0.045	0.015	20	11	0.2	0.08

X6CrNiSiNCe19-10 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Steel pipe:	≥600	Rp0.2：≥290 Rp1.0：≥330	l：≥40；t：≥40

◎ l=longitudinal, t=transverse

◎ Elongation 20% min for wall thickness ≤35 mm after cold deformation.

X6CrNiSiNCe19-10 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!