X6CrNiSiNCe 19-10 1.4818 - EN 10088-1-2005

Grade	X6CrNiSiNCe 19-10
European Standard Steel Grade	1.4818
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X6CrNiSiNCe 19-10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N	Ce
Minimum Value	0.04	1	-	-	-	18	9	0.12	0.03
Maximum Value	0.08	2	1	0.045	0.015	20	11	0.2	0.08

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table Austenitic Stainless Steel

China	United States	International Organization for Standardization		European Standard
ISC	UNS	ISO	Numerical Grade	Numerical Grade
S30450	S30415	X6CrNiSiNCe19-10	4818-304-15-E	1.4818

2 Approximate Comparison Table Austenitic Heat-Resistant Steel

United States	European Standard		Sweden
UNS	EN	Numerical Grade	SS
S30415	X6CrNiSiNCe19-10	1.4818	2372

X6CrNiSiNCe19-10 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X6CrNiSiNCe 19-10 1.4818
2	ISO 4955-2005
	X6CrNiSiNCe19-10
3	EN 10296-2-2005
	X6CrNiSiNCe19-10 1.4818
4	DIN EN 10095-2018
	X6CrNiSiNCe 19-10 1.4818
5	ISO 15510-2014
	X6CrNiSiNCe19-10 4818-304-15-E
6	ISO 4955-2016
	X6CrNiSiNCe19-10 4818-304-15-E
7	NF EN 10088-1-2005
	X6CrNiSiNCe19-10 1.4818
8	NF EN 10296-2-2005
	X6CrNiSiNCe19-10 1.4818
9	DIN EN 10296-2-2006
	X6CrNiSiNCe19-10 1.4818

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!