08Х18Н10Т 0Х18Н10Т ЭИ914 - GOST 10498-1982

Grade	08Х18Н10Т
Old Grade
Corresponding Standard	GOST 10498-1982 Extra Thin-Walled Seamless Pipes of Corrosion-Resistant Steel
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

08Х18Н10Т Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^*	Mo ^*	Ti ^*	W ^*	More
Minimum Value	-	-	-	-	-	17	9	-	-	-	-	Ti:5×C~0.8
Maximum Value	0.08	0.8	2	0.035	0.02	19	11	0.3	0.5	0.8	0.2	Ti:5×C~0.8

• For all steel grades the deviations from standards of chemical composition and residual content of elements in accordance with GOST 563.2-72 are allowed.
• By agreement between the manufacturer and the customer pipes shall be manufactured of other grades of
steel.

* Residual content: Cu、Mo、W. As agreed upon by both the supplier and the buyer, the permissible residual copper content shall not exceed 0.4%.
• The chemical composition is in accordance with GOST 5632-72

08Х18Н10Т Mechanical Properties

Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
≥529	≥40

Approximate Comparison Table Austenitic Stainless Steel

China	Japan	United States		International Organization for Standardization	Germany	France	Russia	United Kingdom
GB	JIS	ASTM/AISI	UNS	ISO	DIN EN/DIN	NF EN/NF	GOST	BS EN/BS
0Cr18Ni11Ti 0Cr18Ni9Ti	SUS321	321	S32100	15	X10CrNiTi18-9	Z6CNT18.10	08Х18Н10Т	321S12 321S20

08Х18Н10Т Corresponding Standards(Same grade name, different standards)

1	GOST 5632-1972
	08Х18Н10Т (0Х18Н10Т) (ЭИ914)
2	GOST 10498-1982
	08Х18Н10Т (0Х18Н10Т) (ЭИ914)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!