N10675 - ASTM B333-2025

Commercial Grade
USA UNS	N10675
Corresponding Standard	ASTM B333-2025 Nickel-Molybdenum Alloy Plate, Sheet, and Strip
Classification	Nickel and Nickel Alloys
Density	9.22 g/cm³

Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	Ti	W	V	Nb	Zr	Co	Al	Ta	More
Minimum Value	1	-	-	-	-	-	1	65	-	27	-	-	-	-	-	-	-	-	Ni+Mo: 94~98
Maximum Value	3	0.01	0.1	3	0.03	0.01	3	-	0.2	32	0.2	3	0.2	0.2	0.1	3	0.5	0.2	Ni+Mo: 94~98

Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Hardness HBW
Sheet, strip; t≤4.76	≥760	≥350	≥40	HRB: ≤100
Plate；4.76＜t≤63.5	≥760	≥350	≥40	HRB: ≤100

Approximate Comparison Table Corrosion-Resistant Alloy

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!