Inconel X-750 - SAE J467b-1956(R1968)

Grade	Inconel X-750
Corresponding Standard	SAE J467b-1956(R1968) Special Purpose Alloys (Superalloys)
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance

Inconel X-750 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	Cr	Ti	Nb	Al	More
Minimum Value	-	-	-	-	-	-	-	-	Ni:Remainder
Maximum Value	6.75	0.04	0.3	0.7	15	2.5	0.85	0.8	Ni:Remainder

The data in the chemical composition table is not the maximum element content, but a typical value, not a design parameter. It is recommended to obtain the design data through actual testing or negotiation with the material manufacturer

Inconel X-750 Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b ksi	Yield Point σ_s ksi	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
2100,1550,1300 F	≥162	≥92	≥24	≥30	HRC ≥33	≥50

InconelX-750 Corresponding Standards(Same grade name, different standards)

1	SAE AMS 5699G-2013
	Inconel X-750
2	SAE J467b-1956(R1968)
	Inconel X-750
3	SAE J 470c-1976
	Inconel X-750 N07750 Inconel alloy X-750

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!