X3CrTi17 1.4510 - EN 10028-7-2016

Grade	X3CrTi17
European Standard Steel Grade	1.4510
Corresponding Standard	EN 10028-7-2016 Flat Products Made of Steels for Pressure Purposes - Part 7: Stainless Steels
Classification	Ferritic Stainless Steel

X3CrTi17 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	More
Minimum Value	-	-	-	-	-	16	Ti: [4(C+N)+0.15]~0.8②
Maximum Value	0.05	1	1	0.04	0.015	18	Ti: [4(C+N)+0.15]~0.8②

X3CrTi17 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
C：T ≤ 4	+A	420~600	long.：≥230 tr.：≥240	T＜3mm, A80① long.+tr. :≥23 T≥3mm, A② long.+tr. :≥23	long.+ tr.: ≥27

• C=cold rolled strip；H=hot rolled strip；P=hot rolled plate
• +A=Annealed；+AT=Solution annealed
• B=width；T=thick

1 Approximate Comparison Table Other Stainless Steels

China	Japan	United States	International Organization for Standardization		Germany		France	European Standard
ISC	JIS	ASTM	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade
S11863	SUS 430LX	S43035	X3CrTi 17	4510-430-35-I	X6CrTi 17 (X8CrTi 17)	1.4510	Z8CT 17	X3CrTi 17	1.4510

2 Approximate Comparison Table Ferritic Stainless Steel

China	Japan	International Organization for Standardization		European Standard
ISC	JIS	ISO	Numerical Grade	Numerical Grade
S11863	SUS430LX	X2CrNb17	4510-430-36-X	1.4510

3 Approximate Comparison Table Ferritic Stainless Steel

X3CrTi17 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!