X5CrNiN19-9 1.4315 - EN 10088-2-2024

Grade	X5CrNiN19-9
European Standard Steel Grade	1.4315
Corresponding Standard	EN 10088-2-2024 Stainless Steels - Part 2: Technical Delivery Conditions for Sheet/Plate and Strip of Corrosion Resistant Steels for General Purposes，
Classification	Austenitic Stainless Steel

X5CrNiN19-9 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	-	-	-	18	8	0.12
Maximum Value	0.06	1	2	0.045	0.015	20	11	0.22

X5CrNiN19-9 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
C：T ≤ 8	+AT	500~750	tr©℗. Rp0.2：≥290 Rp1.0®：≥320	tr. T＜3mm, A80①: ≥40 T≥3mm, A②: ≥40 ©	T＞10mm long.: ≥100 tr.: ≥60
H：T ≤ 13.5	+AT	500~750	tr©℗. Rp0.2：≥270 Rp1.0®：≥310	tr. T＜3mm, A80①: ≥40 T≥3mm, A②: ≥40 ©	T＞10mm long.: ≥100 tr.: ≥60
P：T ≤ 75	+AT	500~750	tr©℗. Rp0.2：≥270 Rp1.0®：≥310	tr. T＜3mm, A80①: ≥40 T≥3mm, A②: ≥40 ©	T＞10mm long.: ≥100 tr.: ≥60

Approximate Comparison Table Austenitic Stainless Steel

China		Taiwan, China	Japan	South Korea	United States		International Organization for Standardization		European Standard
GB	ISC	CNS	JIS	KS	ASTM	UNS	ISO	Numerical Grade	EN	Numerical Grade
06Cr19Ni10N (0Cr19Ni9N)	S30458	304N1	SUS 304N1 SUS 304N2	STS 304N1	304N	S30451	X5CrNiN 19-9	4315-304-51-I	X5CrNiN 19-9	1.4315

X5CrNiN19-9 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!