中文版
Home Material ASTM B209-2014
简体 | 繁體
Grade B209 5052
Corresponding Standard ASTM B209-2014
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
Classification Aluminum and Aluminum Alloys
B209 5052 Chemical Element Composition Content (%)
Component Fe Si Mn Cr Cu Zn Mg Other Individual Other Total More
Minimum Value - - - 0.15 - - 2.2 - - Al:Remainder
Maximum Value 0.4 0.25 0.1 0.35 0.1 0.1 2.8 0.05 0.15
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
B209 5052 Mechanical Properties
thickness
t
in		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Specified Plastic Yield Strength
Rp0.2
Mpa 		Elongation or Extension Rate
δ
%
0.006≤t≤0.007 Annealing (O) 25~31 ≥9.5
0.008≤t≤0.012 Annealing (O) 25~31 ≥9.5 ≥14
0.013≤t≤0.019 Annealing (O) 25~31 ≥9.5 ≥15
0.020≤t≤0.031 Annealing (O) 25~31 ≥9.5 ≥16
0.032≤t≤0.05 Annealing (O) 25~31 ≥9.5 ≥18
0.051≤t≤0.113 Annealing (O) 25~31 ≥9.5 ≥19
0.114≤t≤0.249 Annealing (O) 25~31 ≥9.5 ≥20
0.25≤t≤3 Annealing (O) 25~31 ≥9.5 ≥18
0.09≤t≤0.174 H114 ≥35.5 ≥24 ≥6
0.175≤t≤0.3 H114 ≥34 ≥24 ≥8
0.017≤t≤0.019 H32 or H22 31~38 ≥23 ≥4
0.02≤t≤0.05 H32 or H22 31~38 ≥23 ≥5
0.051≤t≤0.113 H32 or H22 31~38 ≥23 ≥7
0.114≤t≤0.249 H32 or H22 31~38 ≥23 ≥9
0.25≤t≤0.499 H32 or H22 31~38 ≥23 ≥11
0.5≤t≤2 H32 or H22 31~38 ≥23 ≥12
0.009≤t≤0.019 H34 or H24 34~41 ≥26 ≥3
0.02≤t≤0.05 H34 or H24 34~41 ≥26 ≥4
0.051≤t≤0.113 H34 or H24 34~41 ≥26 ≥6
0.114≤t≤0.249 H34 or H24 34~41 ≥26 ≥7
0.25≤t≤1 H34 or H24 34~41 ≥26 ≥10
0.006≤t≤0.007 H36 or H26 37~44 ≥29 ≥2
0.008≤t≤0.031 H36 or H26 37~44 ≥29 ≥3
0.032≤t≤0.162 H36 or H26 37~44 ≥29 ≥4
0.006≤t≤0.007 H38 or H28 ≥39 ≥32 ≥2
0.008≤t≤0.031 H38 or H28 ≥39 ≥32 ≥3
0.032≤t≤0.128 H38 or H28 ≥39 ≥32 ≥4
0.25≤t≤0.499 H112 ≥28 ≥16 ≥7
0.5≤t≤2 H112 ≥25 ≥9.5 ≥12
2.001≤t≤3 H112 ≥25 ≥9.5 ≥16
0.02≤t≤0.05 H322 31~35 ≥21 ≥5
0.051≤t≤0.113 H322 31~35 ≥21 ≥7
0.114≤t≤0.125 H322 31~35 ≥21 ≥9
0.25≤t≤3 F

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!