95Cr18 S44090 9Cr18 - GB /T 1220-2007

Grade	95Cr18
China ISC	S44090
Old Grade
Corresponding Standard	GB /T 1220-2007 Stainless Steel Bars
Classification	Martensitic Stainless Steel

95Cr18 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni
Minimum Value	0.9	-	-	-	-	17	-
Maximum Value	1	0.8	0.8	0.04	0.03	19	0.6

95Cr18 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
Steel bars; d≤75	Annealing					≤255
Sample; d≤75	Quenching + Tempering	-	-	-	-	HRC ≥55	-

• This does not apply to flat bars, but if required by the buyer, it shall be determined through negotiation between the supplier and the buyer.

Approximate Comparison Table

95Cr18 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!