Y12Cr18Ni9Se S30327 Y1Cr18Ni9Se - GB /T 1220-2007

Y12Cr18Ni9Se Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Se
Minimum Value	-	-	-	-	-	17	8	0.15
Maximum Value	0.15	1	2	0.2	0.06	19	10	-

Y12Cr18Ni9Se Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
d≤180	Solid Solution Treatment	≥520	≥205	≥40	≥50	HBW:≤187 HRB:≤90 HV:≤200

• This does not apply to flat bars, but if required by the buyer, it shall be determined through negotiation between the supplier and the buyer.

1 Approximate Comparison Table

2 Approximate Comparison Table

China		Japan	United States	International Organization for Standardization		European Standard
GB	ISC	JIS	UNS	ISO	Numerical Grade	Numerical Grade
Y12Cr18Ni9Se	S30327	SUS303Se	S30323	X12CrNiSe18-9	4625-303-23-X	1.4625

Y12Cr18Ni9Se Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!