中文版
Home Material EN 485-2-2016(+A1:2018)
简体 | 繁體
Grade EN AW-Al Mg4.5Mn0.7
European Standard Steel Grade EN AW-5083
Corresponding Standard EN 485-2-2016(+A1:2018)
Aluminium and Aluminium Alloys - Sheet, Strip and Plate
Classification Aluminum and Aluminum Alloys
EN AW-Al Mg4.5Mn0.7 Chemical Element Composition Content (%)
Component Fe Si Mn Cr Cu Ti Zn Mg Other Individual Other Total More
Minimum Value - - 0.4 0.05 - - - 4 - - Al:Rem
Maximum Value 0.4 0.4 1 0.25 0.1 0.15 0.25 4.9 0.05 0.15
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
◎Chemical composition in accordance with EN 573-3-2019+A2-2023
EN AW-Al Mg4.5Mn0.7 Mechanical Properties
thickness
t
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Specified Plastic Yield Strength
Rp0.2
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
2.5≤t≤250 As fabricated（F）* ≥250
250＜t≤350 ≥245
0.2＜t≤0.5 O，H111 275~350 ≥125 A50mm
≥11		 75
0.5＜t≤1.5 275~350 ≥125 ≥12 75
1.5＜t≤3 275~350 ≥125 ≥13 75
3＜t≤6.3 275~350 ≥125 ≥15 75
6.3＜t≤12.5 270~345 ≥115 ≥16 75
12.5＜t≤50 270~345 ≥115 A
≥15		 75
50＜t≤80 270~345 ≥115 ≥14 73
80＜t≤120 ≥260 ≥110 ≥12 70
120＜t≤200 ≥255 ≥105 ≥12 69
200＜t≤250 ≥250 ≥95 ≥10 69
250＜t≤300 ≥245 ≥90 ≥9 69
6≤t≤12.5 H112 ≥275 ≥125 A50mm
≥12		 75
12.5＜t≤40 ≥275 ≥125 A
≥10		 75
40＜t≤80 ≥270 ≥115 ≥10 73
80＜t≤120 ≥260 ≥110 ≥10 73
1.5≤t≤3 H116，H321 305~385 ≥215 A50mm
≥8		 89
3＜t≤6 305~385 ≥215 ≥10 89
6＜t≤12.5 305~385 ≥215 ≥12 89
12.5＜t≤40 305~385 ≥215 A
≥10		 89
40＜t≤80 285~385 ≥200 ≥10 83
0.2＜t≤0.5 Strain - Hardening -1.4 hard (H12) 315~375 ≥250 A50mm
≥3		 94
0.5＜t≤1.5 315~375 ≥250 ≥4 94
1.5＜t≤3 315~375 ≥250 ≥5 94
3＜t≤6 315~375 ≥250 ≥6 94
6＜t≤12.5 315~375 ≥250 ≥7 94
12.5＜t≤40 315~375 ≥250 A
≥6		 94
0.2＜t≤0.5 Strain - Hardening -1/2 hard (H14) 340~400 ≥280 A50mm
≥2		 102
0.5＜t≤6 340~400 ≥280 ≥3 102
6＜t≤12.5 340~280 ≥280 ≥4 102
12.5＜t≤25 340~400 ≥280 A
≥3		 102
0.2＜t≤0.5 Strain - Hardening -3/4 hard (H16) 360~420 ≥300 A50mm
≥1		 108
0.5＜t≤4 360~420 ≥300 ≥2 108
0.2＜t≤0.5 Strain - hardening -1/4 hardening and partially annealed（H22），Strain - hardening -1/4 hardening and stabilized（H32） 305~380 ≥215 ≥5 89
0.5＜t≤1.5 305~380 ≥215 ≥6 89
1.5＜t≤3 305~380 ≥215 ≥7 89
3＜t≤6 305~380 ≥215 ≥8 89
6＜t≤12.5 305~380 ≥215 ≥10 89
12.5＜t≤40 305~380 ≥215 A
≥9		 89
0.2＜t≤0.5 Strain - hardening -1/2 hardening and partially annealed（H24），Strain - hardening -1/2 hardening and stabilized（H34） 340~400 ≥250 A50mm
≥4		 99
0.5＜t≤1.5 340~400 ≥250 ≥5 99
1.5＜t≤3 340~400 ≥250 ≥6 99
3＜t≤6 340~400 ≥250 ≥7 99
6＜t≤12.5 340~400 ≥250 ≥8 99
◎The hardness is for reference only
*For information only
①Material supplied in the H116 or H321 temper shall be capable of meeting the exfoliation and intergranular corrosion performance specified in EN 13195 using test methods detailed in ASTM G66 and ASTM G67
Approximate Comparison Table Aluminium and Aluminium Alloy
Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
5082 A95083 AlMg4.5Mn0.7 AlMg4.5
AlMg4.5Mn 		3.3547 5183 ENAW-AlMg4.5Mn0.7 ENAW-5083 AMg4.5 AlMg4.5Mn 5083
ENAW-AlMg4.5Mn0.7 Corresponding Standards(Same grade name, different standards)
1 EN 573-3-2003
EN AW-Al Mg4.5Mn0.7 EN AW-5083
2 EN 485-2-2016(+A1:2018)
EN AW-Al Mg4.5Mn0.7 EN AW-5083
3 EN 13195-2013
EN AW-Al Mg4.5Mn0.7 EN AW-5083

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!