C1201 C1201T C1201TS - JIS H 3300-2018(勘误2019)

Grade	C1201
Other Names
Corresponding Standard	JIS H 3300-2018(勘误2019) Copper and Copper Alloy Seamless Pipes and Tubes
Classification	Copper and Copper Alloys

C1201 Chemical Element Composition Content (%)

Component	P	Cu
Minimum Value	0.004	99.9
Maximum Value	0.015	-

C1201 Mechanical Properties

out diameter, wall thickness d,t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Hardness HBW
4≤d≤250, 0.25≤t≤30	C1201T-O C1201TS-O	O	≥205	≥40	HV ≤69
4≤d≤250, 0.25≤t≤30	C1201T-OL C1201TS-OL	OL	≥205	≥40	HV ≤73
4≤d≤250, 0.25≤t≤30	C1201T-1/2H C1201TS-1/2H	1/2H	245~325		HV 70~110
4≤d≤25, 0.25≤t≤3	C1201T-H C1201TS-H	H	≥315		HV ≥100
25＜d≤50, 0.9≤t≤4	C1201T-H C1201TS-H	H	≥315
50＜d≤100, 1.5≤t≤6	C1201T-H C1201TS-H	H	≥315
100＜d≤200, 2≤t≤6	C1201T-H C1201TS-H	H	≥275
200＜d≤350, 2.5≤t≤8	C1201T-H C1201TS-H	H	≥255

C1201 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!