X6CrNi 18-10 1.4948 - EN 10269-2013

Grade	X6CrNi 18-10
European Standard Steel Grade	1.4948
Corresponding Standard	EN 10269-2013 Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X6CrNi 18-10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	0.04	-	-	-	-	17	8	-
Maximum Value	0.08	1	2	0.035	0.015	19	11	0.11

X6CrNi 18-10 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
d≤160	+AT	500~700	≥185	≥40	≥90

1 Approximate Comparison Table Austenitic Stainless Steel

China		Japan	United States		International Organization for Standardization	Germany		European Standard
GB	ISC	JIS	AISI	UNS	ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
07Cr19Ni10	S30409	SUS 304H	304H	S30409	X6CrNi 18-10 X7CrNi 18-9	X6CrNi18-10	1.4948	X6CrNi18-10	1.4948

2 Approximate Comparison Table

Japan	United States		International Organization for Standardization	France	European Standard		Russia
JIS	ASTM	UNS	ISO	NF EN/NF	EN	Numerical Grade	GOST
SUS304H	304H	S30409	X7CrNi18-9	Z6CN18-09	X6CrNi18-10	1.4948	08KH18N10

3 Approximate Comparison Table Seamless Steel Tubes and Pipes for High Pressure Boiler

X6CrNi18-10 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!