X12CrMnNiN 18-9-5 1.4373 - EN 10088-1-2005

Grade	X12CrMnNiN 18-9-5
European Standard Steel Grade	1.4373
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X12CrMnNiN 18-9-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	7.5	-	-	17	4	0.05
Maximum Value	0.15	1	10.5	0.045	0.015	19	6	0.25

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table Austenitic Stainless Steel

China		Taiwan, China	Japan	South Korea	United States		European Standard		Russia	United Kingdom
GB	ISC	CNS	JIS	KS	ASTM	UNS	EN	Numerical Grade	GOST	BS EN/BS
12Cr18Mn9Ni5N	S35450	202	SUS 202	STS 202	202	S20200	X12CrMnNi 18-9-5	1.4373	12Х17Г9АН4	284S16

2 Approximate Comparison Table Austenitic Stainless Steel

China	Japan	United States	International Organization for Standardization		European Standard
ISC	JIS	UNS	ISO	Numerical Grade	Numerical Grade
S35450	SUS202	S20200	X12CrMnNiN18-9-5	4373-202-00-I	1.4373

X12CrMnNiN18-9-5 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X12CrMnNiN 18-9-5 1.4373
2	ISO 15510-2014
	X12CrMnNiN18-9-5 4373-202-00-I
3	NF EN 10088-2-2005
	X12CrMnNiN18-9-5 1.4373
4	NF EN 10088-1-2005
	X12CrMnNiN18-9-5 1.4373

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!