Grade 10Cr17Mo
China ISC S11790
Corresponding Standard GB /T 4240-2019
Stainless steel wires
Classification Ferritic Stainless Steel
10Cr17Mo Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo
Minimum Value - - - - - 16 - 0.75
Maximum Value 0.12 1 1 0.04 0.03 18 0.6 1.25
10Cr17Mo Mechanical Properties
diameter
d
mm
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Elongation or Extension Rate
δ
%
1≤d≤3 Soft 480~650 ≥15
3<d≤16 Soft 450~650 ≥15
0.3≤d≤3 Light Drawing 530~780
3<d≤6 Light Drawing 500~750
6<d≤16 Light Drawing 480~730
①soft - Wire is subjected to bright heat treatment, or after heat treatment, it undergoes pickling or similar processes to remove surface scale.
②Lightly drawn- Wire is drawn to finished dimensions with a small reduction in cross-section after heat treatment.
③Cold drawn - Wire undergoes conventional drawing after heat treatment, which is the process of forming at room temperature through methods such as die drawing or roll drawing.
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Sweden United Kingdom
GB ISC CNS JIS KS ASTM/AISI UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade SS BS EN/BS
10Cr17Mo
(1Cr17Mo)
S11790 434 SUS 434 STS 434 434 S43400 X6CrMo 17-1
9c
(ISO 683-13-1986)
4113-434-00-I X6CrMo 17-1
(X6CrMo 17)
1.4113
1.4113
Z8CD 17-01 X6CrMo 17-1 1.4113 2325 434S17
434S19
2 Approximate Comparison Table Stainless steels for cold heading and cold extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
10Cr17Mo
(1Cr17Mo)
S11790 SUS434 434 S43400 X6CrMo17-1 4113-434-00-I X6CrMo17-1 1.4113

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!