中文版
Home Material JIS G 4303-2005
简体 | 繁體
Grade SUS 316L
Other Names
Corresponding Standard JIS G 4303-2005
Stainless steel bars
Classification Austenitic Stainless Steel
Properties Strength Corrosion Resistance Low-Temperature Toughness Impact Toughness Forgability Weldability
SUS 316L Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo
Minimum Value - - - - - 16 12 2
Maximum Value 0.03 1 2 0.045 0.03 18 15 3
SUS 316L Mechanical Properties
diameter(thickness)
d(t)
mm		 Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Reduction of Area
ψ
% 		Hardness
HBW
≤180 ≥480 ≥175 ≥40 ≥60 ≤217
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
022Cr17Ni12Mo2
(00Cr17Ni14Mo2) 		S31603 316L SUS 316L STS 316L 316L S31603 X2CrNiMo 17-12-2
X2CrNiMo17-12-3 		4404-316-03-I
4432-316-03-I 		X2CrNiMo 18-14-3
(X2CrNiMo 18-12) 		1.4435 Z2CND 17-13 X2CrNiMo 17-12-2
X2CrNiMo17-12-3 		1.4404
1.4432 		03Х17Н14М2 2353 316S11
316S12
2 Approximate Comparison Table
Japan International Organization for Standardization European Standard
JIS ISO Numerical Grade Numerical Grade
SUS316L X2CrNiMo17-14-3 4435-316-03-X (1.44xx)
3 Approximate Comparison Table
China Japan International Organization for Standardization European Standard
GB ISC JIS ISO Numerical Grade Numerical Grade
022Cr17Ni12Mo2 S31603 SUS316L X2CrNiMo18-14-3 4435-316-91-I 1.4435
4 Approximate Comparison Table
China Japan United States International Organization for Standardization Germany France European Standard Sweden United Kingdom
GB JIS ASTM ISO DIN EN/DIN NF EN/NF EN Numerical Grade SS BS EN/BS
00Cr17Ni14Mo2
0Cr18Ni12Mo2Ti 		SUS316
SUS316L 		316L Type19 X2CrNiMo17-13-2 Z2CND17-12
Z3CND17-11-02
Z3CND18-12-02 		X2CrNiMo17-12-2 1.4404 2348 316S11
5 Approximate Comparison Table
China Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB JIS ASTM ISO DIN EN/DIN NF EN/NF EN Numerical Grade GOST SS BS EN/BS
00Cr17Ni14Mo2 SUS316L 316L
TP316L 		Type19a X2CrNiMo18-14-3 Z3CND17-12-03
Z3CND18-14-03 		X2CrNiMo18-14-3 1.4435 03KH17N14M3 2353 316S13
316S14
6 Approximate Comparison Table
China Japan United States International Organization for Standardization Germany France Russia United Kingdom
GB JIS ASTM/AISI ISO DIN EN/DIN NF EN/NF GOST BS EN/BS
00Cr17Ni14Mo2 SUS316L 316L 19 X2CrNiMo1810 Z2CND17.12 08X17H13M2T 316S12
7 Approximate Comparison Table Stainless steels for cold heading and cold extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
022Cr17Ni12Mo2
(00Cr17Ni14Mo2) 		S31603 SUS316L 316L S31603 X2CrNiMo17-12-2 4404-316-03-I X2CrNiMo17-12-2 1.4404
8 Approximate Comparison Table Stainless steels for cold heading and cold extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
022Cr17Ni12Mo2
(00Cr17Ni14Mo2) 		S31603 SUS316L 316L S31603 X2CrNiMo17-12-3 4432-316-03-I X2CrNiMo17-12-3 1.4432
SUS316L Corresponding Standards(Same grade name, different standards)
1 JIS
SUS316L
2 JIS G 4303-2005
SUS 316L SS316L
3 JIS G 4304-2005
SUS 316L SUS 316L-HP SUS 316L-HS SS316L
4 JIS G 4315-2000
SUS 316L SS316L
5 JIS G 4308-2013
SUS 316L SS316L
6 Q/BQB 4302-2009
SUS 316L 316L SS316L
7 JIS G 4309-2013
SUS 316L SUS 316L-W1
8 JIS G 4315-2013
SUS316L SUS316L-WSA
9 JIS G 4317-2018
SUS 316L
10 JIS G 4318-2016
SUS 316L
11 JIS G 4320-2003
SUS 316L
12 JIS G 4305-2021
SUS 316L SUS 316L-CP SUS 316L-CS

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!