中文版
Home Material JIS G 4303-2005
简体 | 繁體
Grade SUS 316Ti
Corresponding Standard JIS G 4303-2005
Stainless steel bars
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
SUS 316Ti Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo More
Minimum Value - - - - - 16 10 2 Ti≥5×C
Maximum Value 0.08 1 2 0.045 0.03 18 14 3
SUS 316Ti Mechanical Properties
diameter(thickness)
d(t)
mm		 Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Reduction of Area
ψ
% 		Hardness
HBW
≤180 ≥520 ≥205 ≥40 ≥50 ≤187
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
06Cr17Ni12Mo2Ti S31668 316Ti SUS 316Ti STS 316Ti 316Ti S31635 X6CrNiMoTi 17-12-2 4571-316-35-I X6CrNiMoTi 17-12-2
(X10CrNiMoTi 18-10) 		1.4571 Z6CNDT 17-12 X6CrNiMoTi 17-12-2 1.4571 08Х17Н13М2Т 2350 320S31
320S17
2 Approximate Comparison Table
China Japan United States Germany France European Standard Russia Sweden United Kingdom
GB JIS ASTM DIN EN/DIN NF EN/NF EN Numerical Grade GOST SS BS EN/BS
0Cr18Ni12Mo2Ti
1Cr18Ni12Mo2Ti 		316Ti
SUS316Ti 		316Ti X10CrNiMoTi18-10
X6CrNiMoTi17-12-2 		Z6CNDT17-12
Z6CNT17-12 		X6CrNiMoTi17-12-2 1.4571 08KH17N13M2T
10KH17N13M2T 		2350
2350-02 		320S31
321S12
3 Approximate Comparison Table Stainless steels for cold heading and cold extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
06Cr17Ni12Mo2Ti
(0Cr18Ni12Mo3Ti) 		S31668 SUS316Ti 316Ti S31635 X6CrNiMoTi17-12-2 4571-316-35-I X6CrNiMoTi17-12-2 1.4571
SUS316Ti Corresponding Standards(Same grade name, different standards)
1 JIS G 4303-2005
SUS 316Ti
2 JIS G 4304-2005
SUS 316Ti SUS 316Ti-HP SUS 316Ti-HS
3 JIS G 4311-2019
SUS316Ti SUS316Ti-HR
4 JIS G 4305-2021
SUS 316Ti SUS 316Ti-CP SUS 316Ti-CS

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!