XM-16 S45500 - ASTM A564/A564M-2019

Grade	XM-16
USA UNS	S45500
Corresponding Standard	ASTM A564/A564M-2019(a) Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
Classification	Precipitation-Hardening Stainless Steel
Properties	Corrosion Resistance

XM-16 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	Ti	Nb
Minimum Value	-	-	-	-	-	11	7.5	1.5	-	0.9	0.1
Maximum Value	0.03	0.5	0.5	0.015	0.015	12.5	9.5	2.5	0.5	1.4	0.5

XM-16 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
Bars, Profiles	Solution Treatment (A)					HB: ≤331 HRC: ≤36
Bar, Section; t≤150; Longitudinal	H900	≥1620	≥1515	≥8	≥30	HRC: ≥47 HB: ≥444
Bar, Section; t≤150; Longitudinal	H950	≥1515	≥1415	≥10	≥40	HRC: ≥44 HB: ≥415
Bar, Section; t≤150; Longitudinal	H1000	≥1415	≥1275	≥10	≥40	HRC: ≥40 HB: ≥363

Approximate Comparison Table

XM-16 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!