SUS 410S SUS 410S-HP SUS 410S-HS - JIS G 4304-2005

Grade	SUS 410S
Other Names
Corresponding Standard	JIS G 4304-2005 Hot-Rolled Stainless Steel Plate,Sheet and Strip
Brand/Supplier	Japan -> JFE Steel
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance

SUS 410S Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni
Minimum Value	-	-	-	-	-	11.5	-
Maximum Value	0.08	1	1	0.04	0.03	13.5	0.6

SUS 410S Mechanical Properties

Mark	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
This standard and JFE-steel	≥410	≥205	≥20	≤183

1 Approximate Comparison Table Martensitic Stainless Steel

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

European Standard

ISC

CNS

JIS

ASTM

UNS

ISO

DIN EN/DIN

W-Nr.

NF EN/NF

Numerical Grade

06Cr13
(0Cr13)

S41008

410S

SUS 410S

STS 410S

410S

S41008

X6Cr 13

X6Cr 13
(X7Cr 13)

1.4000

Z6C 13

X6Cr 13

1.4000

2 Approximate Comparison Table Martensitic Stainless Steel

3 Approximate Comparison Table Martensitic Stainless Steel

China	Japan	United States	International Organization for Standardization	Germany	France	Russia	United Kingdom
GB	JIS	ASTM/AISI	ISO	DIN EN/DIN	NF EN/NF	GOST	BS EN/BS
0Cr13	SUS410S	410S	1 (ISO 683-13-1986)	X7Cr13	Z6C13	08X13	403S17

4 Approximate Comparison Table Ferritic Stainless Steel

China		Japan	United States		International Organization for Standardization		European Standard		Russia
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	EN	Numerical Grade	GOST
06Cr13 (0Cr13) GB/T 20878-2024	S11306 (S41008)	SUS410S	410S ASTM A959	S41008	X6Cr13 ISL 15510	4000-410-08-I	X6Cr13 EN 10088-1	1.4000	08Х13 GOST 5632

SUS410S Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!