B209 5083 - ASTM B209-2014

Grade	B209 5083
Corresponding Standard	ASTM B209-2014 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
Classification	Aluminum and Aluminum Alloys

B209 5083 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.4	0.05	-	-	-	4	-	-	Al:余量
Maximum Value	0.4	0.4	1	0.25	0.1	0.15	0.25	4.9	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

B209 5083 Mechanical Properties

specified thickness t in	Heat Treatment or Condition	Tensile Strength σ_b ksi	Yield Point σ_s ksi	Elongation or Extension Rate δ %
0.051≤t≤1.500	Annealing (O)	40~51	18~29	≥16
1.501≤t≤3.000	Annealing (O)	39~50	17~29	≥16
3.001≤t≤4.000	Annealing (O)	≥38	≥16	≥16
4.001≤t≤5.000	Annealing (O)	≥38	≥16	≥14
5.001≤t≤7.000	Annealing (O)	≥37	≥15	≥14
7.001≤t≤8.000	Annealing (O)	≥36	≥14	≥12
0.125≤t≤0.187	Strain-hardened and stabilized - 1/4 hard (H32)	44~56	≥31	≥10
0.188≤t≤1.500	Strain-hardened and stabilized - 1/4 hard (H32)	44~56	≥31	≥12
1.501≤t≤3.000	Strain-hardened and stabilized - 1/4 hard (H32)	44~56	≥29	≥12
0.250≤t≤1.500	Strain-Hardening (H112)	≥40	≥18	≥12
1.501≤t≤3.000	Strain-Hardening (H112)	≥39	≥17	≥12

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!