X90CrMoV 18 1.4112 - EN 10088-1-2005

Grade	X90CrMoV 18
European Standard Steel Grade	1.4112
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X90CrMoV 18 Chemical Element Composition Content (%)

Component	C ^ⓒ	Si	Mn	P	S ^ⓑ	Cr	Mo	V
Minimum Value	0.85	-	-	-	-	17	0.9	0.07
Maximum Value	0.95	1	1	0.04	0.015	19	1.3	0.12

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table Martensitic Stainless Steel

China		Japan	South Korea	United States		Germany	France	European Standard
GB	ISC	JIS	KS	ASTM/AISI	UNS	DIN EN/DIN	NF EN/NF	EN	Numerical Grade
90Cr18MoV (9Cr18MoV)	S46990	SUS 440B	STS 440B	440B	S44003	X90CrMoV 18	Z6CND17.12	X90CrMoV 18	1.4112

2 Approximate Comparison Table Plastic Mold Steel

China		Japan	United States		Germany
GB	ISC	JIS	ASTM	UNS	DIN EN/DIN	W-Nr.
9Cr18MoV	T46993	SUS 440B	440B	S44003	X90CrMoV 18	1.4112

X90CrMoV18 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X90CrMoV 18 1.4112
2	DIN 17230-1980
	(X90CrMoV18) X89CrMoV18 1 1.3549 (1.4112)
3	EN 10088-3-2014
	X90CrMoV 18 1.4112
4	DIN EN 10088-3-2014
	X90CrMoV 18 1.4112
5	NF EN 10088-1-2005
	X90CrMoV18 1.4112

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!