N06333 - SAE J 470c-1976

Commercial Grade
USA UNS	N06333
Corresponding Standard	SAE J 470c-1976 Wrought Nickel and Nickel - Related Alloys
Classification	Alloy Steel
Properties	Corrosion Resistance

Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	Cr	Ni	Mo	W	Co
Minimum Value	-	-	-	-	-	-	-	-	-
Maximum Value	-	0.08	-	2	-	-	-	-	-
Nominal Value	20	-	1.25	-	25	45	3	3	3

Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod; d>12.7	690	345	50	57	HB 160~202	150
Wire; d≤12.7	690	345	50	57	160~202	150
Forging, thin sheet, strip	690	345	50	57	160~202	150

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!