中文版
Home Material SAE J 470c-1976
简体 | 繁體
Commercial Grade
USA UNS N08800
Corresponding Standard SAE J 470c-1976
Wrought Nickel and Nickel - Related Alloys
Classification Special Alloy Steel
Properties Strength Corrosion Resistance
Chemical Element Composition Content (%)
Component C Si Mn Cr Ni Cu Ti Al
Nominal Value 0.1 1 1.5 21 32.5 0.75 0.45 0.4
Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
Wire; d≤12.7 517~1035 241~862 10~60 120~130
Bar, Rod; d>12.7 517~1035 241~862 10~60 120~130
Forgings, Thin Sheet, Strip, Tubing 517~1035 241~862 10~60 120~130
1 Approximate Comparison Table Corrosion-Resistant Alloy
China Japan South Korea United States Germany United Kingdom
GB ISC JIS KS Commercial Grade UNS DIN EN/DIN W-Nr. BS EN/BS
NS 1101
(NS 111)
(0Cr20Ni32AlTi) 		H 08800
H 01101 		NCF 800
(NCF 2B) 		NCF 800 Incoloy 800 N 08800 X10NiCrAlTi 32-20 1.4876 NA 15
2 Approximate Comparison Table Austenitic Stainless Steel
Japan United States International Organization for Standardization European Standard
JIS UNS ISO Numerical Grade EN Numerical Grade
NCF800 N08800 X8NiCrAlTi32-21 4876-088-00-1 X8NiCrAlTi32-21 1.4959
1.4876
3 Approximate Comparison Table Austenitic Heat-Resistant Steel
United States International Organization for Standardization European Standard
ASTM UNS ISO EN Numerical Grade
800 N08800 X8NiCrAlTi32-21 X10NiCrAlTi32-21 1.4876

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!