B16 CrMoV - ASTM A193/A193M-2001

Grade	B16
Other Names
Corresponding Standard	ASTM A193/A193M-2001 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Servise
Classification	Alloy Steel
Properties	High-Temperature Resistance Good Machinability

B16 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	V	Al
Minimum Value	0.36	0.15	0.45	-	-	0.8	0.5	0.25	-
Maximum Value	0.47	0.35	0.7	0.035	0.04	1.15	0.65	0.35	0.015

Note: The intentional addition of Bi, Se, Te, and Pb is not permitted.

B16 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
d≤M64	Tempering	≥860	≥725	≥18	≥50	≤321
M64<d≤M100	Tempering	≥760	≥655	≥17	≥45	≤321
M100<d≤M180	Tempering	≥690	≥586	≥16	≥45	≤321

New and Old Grade Replacement List

Approximate Comparison Table Steel for Cold Heading and Cold Extrusion

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!