XM-16 S45500 - ASTM A693-2013

Grade	XM-16
USA UNS	S45500
Corresponding Standard	ASTM A693-2013 Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
Classification	Precipitation-Hardening Stainless Steel

XM-16 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	Ti	More
Minimum Value	-	-	-	-	-	11	7.5	1.5	-	0.8	Nb+Ta：0.10~0.50
Maximum Value	0.05	0.5	0.5	0.04	0.03	12.5	9.5	2.5	0.5	1.4	Nb+Ta：0.10~0.50

XM-16 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
t≥0.25	Solid Solution Treatment	≤1205	≤1105	≥3	HRC ≤36
t≤0.51	Precipitation Hardening, 510℃	≥1525	≥1410		HRC ≥44
0.51＜t≤1.57	Precipitation Hardening, 510℃	≥1525	≥1410	≥3	HRC ≥44
t＞1.57	Precipitation Hardening, 510℃	≥1525	≥1410	≥4	HRC ≥44

Approximate Comparison Table

XM-16 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!