N06693 - ASTM B168-2019 - H2ABC

中文版

USA UNS	N06693
Corresponding Standard	ASTM B168-2019 Nickel-Chromium-Aluminum Alloys , Nickel-Chromium-Iron Alloys , Nickel-Chromium-Cobalt-Molybdenum Alloy , Nickel-Iron-Chromium-Tungsten Alloy , and Nickel-Chromium-Molybdenum-Copper Alloy Plate, Sheet, and Strip
Classification	Alloy Steel

Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cr	Cu	Ti	Nb	Al	More
Minimum Value	2.5	-	-	-	-	27	-	-	0.5	2.5	Ni余量
Maximum Value	6	0.15	0.5	1	0.01	31	0.5	1	2.5	4	Ni余量

Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Plate, Sheet	Hot Rolled, Annealed	≥690	≥345	（in 50mm or 4D） ≥30
Sheet, Strip	Cold Rolled, Annealed	≥690	≥345	≥30

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!