中文版
Home Material ASTM B168-2019
简体 | 繁體
USA UNS N06025
Corresponding Standard ASTM B168-2019
Nickel-Chromium-Aluminum Alloys , Nickel-Chromium-Iron Alloys , Nickel-Chromium-Cobalt-Molybdenum Alloy , Nickel-Iron-Chromium-Tungsten Alloy , and Nickel-Chromium-Molybdenum-Copper Alloy Plate, Sheet, and Strip
Classification Nickel and Nickel Alloys
Chemical Element Composition Content (%)
Component Fe C Si Mn P S Cr Cu Ti Zr Al Y More
Minimum Value 8 0.15 - - - - 24 - 0.1 0.01 1.8 0.05 Ni余量
Maximum Value 11 0.25 0.5 0.15 0.02 0.01 26 0.1 0.2 0.1 2.4 0.12
Mechanical Properties
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Plate, Sheet Hot Rolled, Annealed ≥680 ≥270 （in 50mm or 4D）
≥30
Plate, Sheet, Strip Cold Rolled, Annealed ≥680 ≥270 ≥30

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!