N06603 - ASTM B168-2019 - H2ABC

中文版

USA UNS	N06603
Corresponding Standard	ASTM B168-2019 Nickel-Chromium-Aluminum Alloys , Nickel-Chromium-Iron Alloys , Nickel-Chromium-Cobalt-Molybdenum Alloy , Nickel-Iron-Chromium-Tungsten Alloy , and Nickel-Chromium-Molybdenum-Copper Alloy Plate, Sheet, and Strip
Classification	Alloy Steel

Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Ti	Zr	Al	Y	More
Minimum Value	8	0.2	-	-	-	-	24	-	0.01	0.01	2.4	0.01	Ni余量
Maximum Value	11	0.4	0.5	0.15	0.02	0.01	26	0.5	0.25	0.1	3	0.15	Ni余量

Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Plate, Sheet	Hot Rolled, Annealed	≥650	≥300	（in 50mm or 4D） ≥25
Plate	Cold Rolled, Annealed	≥650	≥300	≥25
t＞0.25mm,Sheet/Strip	Cold Rolled, Annealed	≥650	≥300	≥25

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!