中文版
Home Material ASTM B168-2019
简体 | 繁體
USA UNS N06699
Corresponding Standard ASTM B168-2019
Nickel-Chromium-Aluminum Alloys(UNS N06699) , Nickel-Chromium-Iron Alloys(UNS N06600,N06601,N06603,N06690,N06993,N06045,and N06696), Nickel-Chromium-Cobalt-Moly Alloy(UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy(UNS N06674), and Nickel-Chromium-Molyb
Classification Alloy Steel
Chemical Element Composition Content (%)
Component Fe C Si Mn P S Cr Cu N Ti Nb Zr B Al More
Minimum Value - 0.005 - - - - 26 - - - - - - 1.9 Ni余量
Maximum Value 2.5 0.1 0.5 0.5 0.02 0.01 30 0.5 0.05 0.6 0.5 0.1 0.008 3
Mechanical Properties
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Plate, Sheet Hot Rolled, Annealed ≥610 ≥240 （in 50mm or 4D）
≥40
Plate, Sheet, Strip Cold Rolled, Annealed ≥610 ≥240 ≥40

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!