Hastelloy C - SAE AMS 5530G-2012

Grade	Hastelloy C
Corresponding Standard	SAE AMS 5530G-2012 Alloy Sheet,Strip,and Plate,Corrsion and Heat Resistant 58Ni - 15.5Cr - 16Mo - 3.8W - 5.5Fe Solution Heat Treated
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance High-Temperature Resistance Good Weldability
Density	8.941 g/cm³

Hastelloy C Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Mo	W	V	Co	More
Minimum Value	4	-	-	-	-	-	14.5	15	3	-	-	Ni+Co：余量
Maximum Value	7	0.08	1	1	0.04	0.03	16.5	17	4.5	0.35	2.5	Ni+Co：余量

Hastelloy C Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Thick plate, thin sheet, strip; t≤4.75	Solution Heat Treatment	≥795	≤345	≥40	HRC ≤24
Thick plate, thin sheet, strip; 4.75<t≤18.75	Solution Heat Treatment	≥690	≥310	≥30	≥25
Thick plate, thin sheet, strip; 18.75<t≤62.5	Solution Heat Treatment	≥620	≥310	≥20	≥25
Thick Plate, Thin Plate, Strip; t > 62.5					By Agreement

HastelloyC Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!